ASME B16.5 Slip On Flange and ASME B16.47 Series b Carbon Steel Slip On Flange may be added to the farthest furthest extents of a line or to at any rate one terminations of a line fittings. treated steel slip on rib is organized so the presented finish of the line or fitting is confounded or short of the spine face by the thickness of the line divider paying little regard to 1/8 of an inch.
The relationship with the line is done with 2 filet welds, too at the outside as other than at inside the Raised Faced Slip-On Flanges. Level Faced Slip-On Flanges have a lower material cost than weld neck spine and are everything viewed as the more accommodatingly changed. Our Carbon Steel Slip On Flange Manufacturers workplaces can complete any level of courses of action. Slip on pipe spine may what's more be used a lap joint ribs expecting Type B or Type C stub closes are used.

Specification of Slip on Flanges
ASME B16.5 Slip On Flange Size Chart 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Slip on threaded flange Standards ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092
SORF Flanges Pressure Rating ANSI Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Slip on pipe flange
Slip On Weld Flange Pressure Calculation in DIN 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 SORF Flanges
JIS 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K Slip On Weld Flange
UNI 6Bar 10Bar 16Bar 25Bar 40Bar Slip on threaded flange
EN 6Bar 10Bar 16Bar 25Bar 40Bar Flat Faced Slip-On Flanges
Coating Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized ASME B16.47 SORF Flanges
Most common types of Raised Faced Slip-On Flanges Forged / Threaded / Screwed / Plate
Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Production technique
Forged, Heat treated and machined
Connect Type/ Flange Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove
Special design
As per your drawing

AS, ANSI, BS, DIN and JIS
15 NB (1/2") to 200 NB (8")
Equal and Reducing Configurations

Test Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Equipment Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc

Slip on threaded flange Uses & application
Bitumen upgraders.
Heavy oil refineries.
Nuclear power (mostly seamless).
Petrochemicals and acids.