Middleeast Valve is one of famous company of Butterfly valve supplier in Oman
We supply different types of valves to different cites like Hatta , AI Dhaid.
Butterfly valves are a family of quarter-turn rotational motion valves that are used in pipelines to shut-off flow. It is often stated that butterfly valves can be utilised to control flow. We do not advise doing this, though, as it may harm the valve disc and impair the sealing capabilities.

Advantages of Butterfly valve:-

• Easy to install and operate
• Energy efficiency has improved.
• Good for on/off and throttling
• Good for slurries part
• Large seating area
• Larger sizes are available.
• Less assistance is required.
• Lightweight
• Low operation torque allows for simple operation.
• Low-pressure drop.

Types of Butterfly Valve

• Lug Butterfly Valve
Lug-style butterfly valves are usually composed of metal such as ductile iron or steel For bolt connections, they have threaded tapped lugs placed on the valve flanges. Although a blind flange is generally advised, lug-style butterfly valves are adequate for end-of-line service.

• Wafer Butterfly Valve

A wafer butterfly valve is one form of valve used to regulate the flow of fluids in a pipe system. This valve is made up of a disk-shaped component that is fastened to a stem. The valve can open and shut because of the disk's ability to rotate

• Flanged Butterfly Valve

A quarter-turn valve is a flanged butterfly valve. To start or halt fluid flow, the valve disc must be spun a quarter turn. A quarter turn of the hand lever or hand wheel in the anticlockwise direction opens a butterfly valve of the flange type (90 degrees)


• Double eccentric Butterfly Valve

Double eccentric butterfly valves are most frequently utilised in below-ground water supply systems. When putting butterfly valves below, a shallower bury depth is necessary, and they are often more affordable than gate valves, particularly when they are substantial in size.

• Triple eccentric Butterfly Valve

Triple eccentric butterfly valves are used for prevent galling and scratches between the metal seat and the metal disc .Only after the seal is fully closed, as a result of its special design, does it come into touch with the seat.

• Double offset Butterfly Valve

Double offset butterfly valves are frequently referred to as high-performance butterfly valves and have the following two offsets from the body's centre: The disc seat and the centerline of the body seal are separated by the shaft axis. The centre line of the valve or pipeline


• Triple offset Butterfly Valve
The triple offset technique, as the name suggests, employs three different offsets to produce a bubble-tight shut-off. One of the offsets relates to where the valve shaft is situated in relation to the bore's centerline. The distance between the shaft and the centerline of the disc/seat sealing surface is another offset.

Industries that use Butterfly Valves:

• Chemical
• Compressed air services
• Drilling and production
• Dry bulk handling
• Fire protection
• Fuel handling systems
• Lubrication system
• Marine systems
• Oil and gas and many more…


Description of Butterfly Valves:

Body Material: Cast Carbon Steel (WC6, WCB, WCC), Stainless Steel (CF8, CF8M, F31L, F91, SS304, SS904L, SS316, SS316L), Duplex Steel and Super Duplex Steel (F51, F53, F55), Cast Iron, Ductile Iron.
Class: 150 – 300
Nominal Pressure:- PN6 – PN25
Ends: Flanged, Lug, Wafer
Operations: Lever operated, Gear operated, Electric actuated &
Pneumatic actuated.
Size: 2” – 48”; DN50 – DN1200

Visit us now - https://www.Middleeastvalve.com/product-category/butterfly-valve/




Globe Valve supplier Saudi Arabia

Middleeast Valve is the prime company of Globe valve supplier Saudi Arabic . Middleeast Valve Supply different types of valves to different cites and countries all over the world. A globe valve controls a pipeline's flow. The movement of liquid or gas via a pipe is managed or stopped using it. The name "globe valve" refers to the spherical shape of the body, which is divided into two halves by an internal baffle. It is also known as throttle valves
It consists of a rotating disk-like component and a fixed ring seat inside of an usually spherical body. A disc or plug is used to cover the globe valve's opening in the seat, which is located in the middle and parallel to the pipe. The design of globe valves can accommodate flow in either


Types of a Globe Valve:
• Pressure Seal Globe Valve
• Bellow Seal Globe Valve
• Y Type Globe Valve
• Angle Type Globe Valve
• Forged Steel Globe Valve

Parts of Globe valve
• Disc
• Seat
• Bonnet
• Actuator
• Body
• Stem
Industries where Globe Valves are operated:
? Oil and Gas
? Power generation
? Pulp and Paper

Advantages of a Globe Valve
• Excellent shutoff capability
• Throttling capability ranging from moderate to excellent
stroke lengthening (compared to a gate valve)
• Available in y, z, and angle patterns, each with its own set of advantages.
• Seats are simple to machine or resurface.
• The valve can be used as a stop-check valve when the disc is not attached to the stem.
• Has excellent closure ability.
• Repair work is easy to repair as the seat and disc can be accessed from the valve top.

Applications of a Globe Valve:
? Piping in small sizes.
? Plumbing sector.
? Provide flow control.
? Provide leak tightness.
? Pumps and compressors.
? Used as an emergency shutdown valve


Difference between globe valve and ball valve

Globe valve
Ball valve


A globe valve uses a plug (stem) that closes against the flow
Ball valve has a gate (ball) that closes across the flow.


Globe valves are good for regulating flow
Ball valves are better for on/off control without pressure drop.


Description:

• Materials: Monel, Incoloy, Inconel, F55, F53, F51, Cast iron, SS304, SS316, Titanium, Zirconium,CF8, CF8M, CF3, CF3M, WC1, Carbon steel(WCB, WCC,WC6, LCB, LF2, WC9
• Class: 150 to 2500
• Nominal Pressure: PN10 to PN450
• Size: 1/2" to 24"
• Ends: Flanged, Buttweld, Socket weld, Threaded
• Operations: Handwheel operated,Gear Operated , Electric Actuated and Pneumatic Actuated.

Find us:- https://www.Middleeastvalve.com/product-category/globe-valve/



Advantages of Butterfly valve:-

• Easy to install and operate
• Energy efficiency has improved.
• Good for on/off and throttling
• Good for slurries part
• Large seating area
• Larger sizes are available.
• Less assistance is required.
• Lightweight
• Low operation torque allows for simple operation.
• Low-pressure drop.
Types of Butterfly Valve
• Lug Butterfly Valve
Lug-style butterfly valves are usually composed of metal such as ductile iron or steel For bolt connections, they have threaded tapped lugs placed on the valve flanges. Although a blind flange is generally advised, lug-style butterfly valves are adequate for end-of-line service.
• Wafer Butterfly Valve
A wafer butterfly valve is one form of valve used to regulate the flow of fluids in a pipe system. This valve is made up of a disk-shaped component that is fastened to a stem. The valve can open and shut because of the disk's ability to rotate
• Flanged Butterfly Valve
A quarter-turn valve is a flanged butterfly valve. To start or halt fluid flow, the valve disc must be spun a quarter turn. A quarter turn of the hand lever or hand wheel in the anticlockwise direction opens a butterfly valve of the flange type (90 degrees)
• Double eccentric Butterfly Valve
Double eccentric butterfly valves are most frequently utilised in below-ground water supply systems. When putting butterfly valves below, a shallower bury depth is necessary, and they are often more affordable than gate valves, particularly when they are substantial in size.
• Triple eccentric Butterfly Valve
Triple eccentric butterfly valves are used for prevent galling and scratches between the metal seat and the metal disc .Only after the seal is fully closed, as a result of its special design, does it come into touch with the seat.
• Double offset Butterfly Valve
Double offset butterfly valves are frequently referred to as high-performance butterfly valves and have the following two offsets from the body's centre: The disc seat and the centerline of the body seal are separated by the shaft axis. The centre line of the valve or pipeline and the
• Triple offset Butterfly Valve
The triple offset technique, as the name suggests, employs three different offsets to produce a bubble-tight shut-off. One of the offsets relates to where the valve shaft is situated in relation to the bore's centerline. The distance between the shaft and the centerline of the disc/seat sealing surface is another offset.

Industries that use Butterfly Valves:

• Chemical
• Compressed air services
• Drilling and production
• Dry bulk handling
• Fire protection
• Fuel handling systems
• Lubrication system
• Marine systems
• Oil and gas and many more…


Description of Butterfly Valves:

Body Material: Cast Carbon Steel (WC6, WCB, WCC), Stainless Steel (CF8, CF8M, F31L, F91, SS304, SS904L, SS316, SS316L), Duplex Steel and Super Duplex Steel (F51, F53, F55), Cast Iron, Ductile Iron.
Class: 150 – 300
Nominal Pressure:- PN6 – PN25
Ends: Flanged, Lug, Wafer
Operations: Lever operated, Gear operated, Electric actuated &
Pneumatic actuated.
Size: 2” – 48”; DN50 – DN1200

Visit us now - https://www.Middleeastvalve.com/product-category/butterfly-valve/




Globe Valve supplier Saudi Arabia

Middleeast Valve is the prime company of Globe valve supplier Saudi Arabic . Middleeast Valve Supply different types of valves to different cites and countries all over the world. A globe valve controls a pipeline's flow. The movement of liquid or gas via a pipe is managed or stopped using it. The name "globe valve" refers to the spherical shape of the body, which is divided into two halves by an internal baffle. It is also known as throttle valves
It consists of a rotating disk-like component and a fixed ring seat inside of an usually spherical body. A disc or plug is used to cover the globe valve's opening in the seat, which is located in the middle and parallel to the pipe. The design of globe valves can accommodate flow in either


Types of a Globe Valve:
• Pressure Seal Globe Valve
• Bellow Seal Globe Valve
• Y Type Globe Valve
• Angle Type Globe Valve
• Forged Steel Globe Valve

Parts of Globe valve
• Disc
• Seat
• Bonnet
• Actuator
• Body
• Stem
Industries where Globe Valves are operated:
? Oil and Gas
? Power generation
? Pulp and Paper

Advantages of a Globe Valve
• Excellent shutoff capability
• Throttling capability ranging from moderate to excellent
stroke lengthening (compared to a gate valve)
• Available in y, z, and angle patterns, each with its own set of advantages.
• Seats are simple to machine or resurface.
• The valve can be used as a stop-check valve when the disc is not attached to the stem.
• Has excellent closure ability.
• Repair work is easy to repair as the seat and disc can be accessed from the valve top.

Applications of a Globe Valve:
? Piping in small sizes.
? Plumbing sector.
? Provide flow control.
? Provide leak tightness.
? Pumps and compressors.
? Used as an emergency shutdown valve


Difference between globe valve and ball valve

Globe valve
Ball valve


A globe valve uses a plug (stem) that closes against the flow
Ball valve has a gate (ball) that closes across the flow.


Globe valves are good for regulating flow
Ball valves are better for on/off control without pressure drop.


Description:

• Materials: Monel, Incoloy, Inconel, F55, F53, F51, Cast iron, SS304, SS316, Titanium, Zirconium,CF8, CF8M, CF3, CF3M, WC1, Carbon steel(WCB, WCC,WC6, LCB, LF2, WC9
• Class: 150 to 2500
• Nominal Pressure: PN10 to PN450
• Size: 1/2" to 24"
• Ends: Flanged, Buttweld, Socket weld, Threaded
• Operations: Handwheel operated,Gear Operated , Electric Actuated and Pneumatic Actuated.

Find us:- https://www.Middleeastvalve.com/product-category/globe-valve/